« Back to Category

Titanium:Sapphire Femtosecond Pump Mirrors Optimized for Negative GDD

01/21/2013

Ultrafast dichroic pump mirrors designed to support cutting edge performance in femtosecond titanium:sapphire (Ti:S) lasers

REO, a leading manufacturer of high volume precision optical solutions, has introduced an expanded series of ultrafast dichroic pump mirrors designed to support cutting edge performance in femtosecond titanium:sapphire (Ti:S) lasers.  This is achieved through the use of thin film coatings that generate negative group delay dispersion (GDD) to compensate for positive GDD caused by other cavity components. 

These focusing (concave) optics provide broadband performance, delivering >99.7% reflectivity over the entire 675 – 1100 nm wavelength range, while also providing high (>98%) transmission at the 532 nm pump wavelength.  This broadband reflectivity makes these optics ideal for use in virtually any Ti:S oscillator, particularly one-box models.  Examples include broadband (very short pulse) oscillators, widely tunable oscillators for microscopy and spectroscopy, and fixed wavelength oscillators for seeding ultrafast amplifiers.

Even if it produces broadband output, a high performance femtosecond laser oscillator’s pulsewidth is often limited by the positive GDD, caused principally by the transmissive optics in the laser cavity, including the Ti:S crystal itself.  This can be partially offset by the use of reflective cavity optics with negative GDD.  These enhanced pump mirrors from REO typically deliver up to 100 fs2 of negative GDD.  In addition they are designed for minimum Third Order Dispersion (TOD) to further simplify the laser designer’s task of achieving the shortest possible transform-limited pulsewidth. 

These spherical mirrors are offered with a radius of curvature of 10 cm, 15 cm or 50 cm, with flats and other radius values available upon request.  Standard diameters are 7.75 mm (0.3 in.), 12.75 mm (0.5 in.) and 19 mm (0.75 in.).

REO produces high precision thin film coatings, optics and opto-mechanical assemblies for the ultraviolet, visible and infrared. Located in Boulder, CO, the company primarily services medium to high volume OEMs including manufacturers of defense and aerospace systems, laser systems, semiconductor tools, medical systems, life sciences instrumentation and telecom equipment.  REO is a privately held company.  For more information, contact Trey Turner, Chief Technology Officer, at +1-303-245-4390, e mail TreyT@reoinc.com,, www.reoinc.com, or Susan Anway, Vice President of Finance and Chief Financial Officer at +1-720-562-3206, e-mail SueA@reoinc.com.

Contact REO to have us start thinking about you. 303.938.1960